Weston homes look tidy from the street, and the HOA likes to keep it that way. Behind the stucco, though, many of these houses are now 25 to 35 years old, and the electrical systems are starting to show it. Chanay Electric works in Weston regularly from our base in nearby Plantation.
We help Weston families with panel upgrades for houses that have added pools, summer kitchens and EV chargers, generator hookup prep before hurricane season, and indoor and outdoor lighting that fits community guidelines. The goal is simple: clean work, done to code, that you do not have to think about again.
A few words from Weston homeowners we have worked with.
These are the jobs Weston homeowners ask us about most.
In Weston we often trace problems to the outdoors. Landscape lights on a tired transformer, pool equipment sharing a circuit with the lanai, or a GFCI hidden behind a hedge that tripped and took half the patio with it. We find the cause, label things properly and leave you knowing where every reset is.
Many Weston homes were built with panels that were fine for the original house. Since then came pool heaters, a second fridge in the garage, a bigger AC and maybe an EV. We calculate the real load, upgrade where needed and make room for a generator inlet or transfer switch if you plan to add one.
We install EV chargers in Weston garages, ceiling fans on lanais and in bedrooms, recessed lighting in remodeled kitchens, and landscape lighting that stays within HOA guidelines. We also prep homes for portable or standby generators with the right inlet and interlock or transfer switch, so you are ready before the next storm.
Full rewires are less common in Weston than in older cities, but partial rewiring comes up a lot during remodels. Kitchen and bath renovations need dedicated circuits and modern protection, and garage conversions need proper wiring rather than an extension of whatever was nearby. We bring those areas up to current code cleanly.
Weston sits on the western edge of Broward, right up against the Everglades, and summer storms build fast out there. A whole house surge protector guards your pool equipment, AC controls, smart home gear and appliances from lightning and grid spikes, including the bump that can come when power is restored after a storm.
If your Weston home needs an upgrade, a fix or a plan before hurricane season, we are happy to walk through it with you. We know Weston communities and their rules, so we plan around HOA requirements from the first visit.
We work Monday through Saturday, 8am to 5pm. Contact us or call Chanay Electric at (754) 799-4371.
Weston was planned from the ground up, mostly from the late 1980s onward, and nearly every neighborhood has an HOA. That shapes electrical work here. Exterior fixtures, landscape lighting and anything mounted on the outside of the house may need association approval, and many communities have specific rules about what goes where. We are used to working within those rules and can give you the details your HOA asks for.
Pools are close to standard in Weston, and pools bring pumps, heaters, lights, automation panels and bonding requirements. Older equipment pads often have a patchwork of additions. We clean those up, check bonding and GFCI protection, and make sure the pool circuits are not sharing space they should not. Many Weston homes also back onto lakes and canals, which means patios, docks and lanais close to water. Outdoor outlets there need GFCI protection and weather resistant covers, and lighting near the water should be rated for wet locations. We check those details on every visit because they are easy to miss and important to get right.
Hurricane preparation is the other big one. Many Weston families want a generator, and the safe way to connect one is with a proper inlet and interlock or transfer switch, never a cord into a wall outlet. Combine that with whole house surge protection and a panel with room to grow, and your home is in a much better spot when storms come through. Weston neighborhoods we serve include:
Often, yes. Many Weston associations review exterior changes, including fixtures and landscape lighting. Check your community's guidelines before work starts. We can give you fixture details, locations and a simple description of the work to include with your application, which usually makes the approval process smoother.
Use a generator inlet with an interlock kit on your panel, or a transfer switch. Either one keeps power from feeding back onto utility lines, which can hurt line workers and damage your equipment. Never plug a generator into a wall outlet. We install both options and help you pick one that fits.
Yes. We repair and rewire pool pump, heater and lighting circuits, add GFCI protection, and check bonding at the equipment pad. If your pool setup has been added to over the years, we can clean it up so each piece has its own properly sized circuit.
It depends on the panel size and what is already on it. Homes with a pool, two AC units and a large kitchen may be close to the limit. We do a load calculation first. If there is room, the install is simple. If not, we explain your upgrade options clearly.
Yes. Chanay Electric is licensed, bonded and insured. We pull permits for work that requires them and schedule the inspections with the city. You can call us at (754) 799-4371, Monday through Saturday, 8am to 5pm, with any questions before booking. We are happy to share proof of license and insurance with your HOA if they ask for it.
Lighthouse Point, Deerfield Beach, Coconut Creek, Plantation, Southwest Ranches, Pompano Beach, and all of Broward County.
