Salt air is hard on electrical equipment, and Pompano Beach gets plenty of it. Outdoor outlets corrode, exterior fixtures rust from the inside, and panels on the side of the house can show green and white crust on their connections. The closer you live to the ocean or the Intracoastal, the faster it happens.
Chanay Electric is a licensed, bonded and insured electrician based in Plantation. We handle electrical repairs, rewiring and outdoor lighting for Pompano Beach homes, from older ranch houses inland to waterfront homes along the canals, and we choose materials that stand up to the coast.
Here is what a few of our customers have said.
These are the electrical services Pompano Beach homeowners need most.
Near the water, corrosion is the hidden cause of many problems. An outdoor GFCI that trips for no reason, a porch light that works only some days, or an outlet that feels warm often trace back to rusted terminals or moisture in a box. We open it up, clean or replace the damaged parts, and seal it properly.
Exterior panels in Pompano Beach take a beating from salt and humidity. Rust on the cover, corroded breakers and loose connections can all lead to overheating. If your panel is showing its age or you need more capacity, we can replace it with equipment better suited to a coastal setting and get it permitted and inspected.
Outdoor lighting is popular here, on patios, pool decks, docks and front walks. Near the coast, fixture choice matters as much as installation. We favor weather-rated, corrosion-resistant fixtures and covers, and we install ceiling fans on lanais and porches that are rated for damp or wet locations so they last.
Pompano Beach has plenty of homes built in the 1950s through the 1970s. Original wiring from that era may lack grounding and was not designed for today’s appliances. We inspect it, identify the circuits that are worn or unsafe, and replace them, often working room by room so you can stay in the house during the job.
Between summer lightning over the ocean and the power interruptions that come with storm season, Pompano Beach homes see their share of surges. A whole-house surge protector at the panel helps shield your AC, appliances and electronics. It is a sensible step for any coastal home and pairs well with plug-in protectors inside.
If your Pompano Beach home has rusty outdoor outlets, a tired panel or wiring you are not sure about, we will give you an honest assessment and a clear plan, with no pressure.
We work Monday through Saturday, 8am to 5pm. Call Chanay Electric at (754) 799-4371 or contact us online to schedule.
Pompano Beach runs from the beach and the Intracoastal inland past I-95, and the electrical needs change as you move west. On the east side, salt air and canals are the main concern. Corrosion builds up on anything metal that sits outside, including meter cans, panel covers, outdoor outlets, light fixtures and pool equipment connections. Regular checks and the right materials make a real difference in how long that equipment lasts.
Many homes in Pompano Beach were built in the postwar decades. Some have been updated well, and others still carry original wiring or a mix of old and new. If you have bought an older home, or you are planning a remodel, a safety inspection is a smart first step. It tells you what you are working with before you open walls, and it helps you budget for the work in the right order.
Flooding and storm surge are also part of life near the water. After high water or a hurricane, any outlet, panel or appliance that got wet should be checked by an electrician before it is used again. Hurricane season runs from June through November, and a whole-house surge protector is worth having in place before it starts. Work that needs a permit goes through the city’s building department, and we handle it.
We serve homes all over Pompano Beach, including:
Salt in the air settles on metal and speeds up corrosion. Outdoor outlets, fixtures, meter cans and panels are most exposed. Corroded connections can get loose and hot, which leads to tripping, flickering and in bad cases fire risk. Using corrosion-resistant materials and checking outdoor equipment every few years helps a lot.
Do not use them. If water reached outlets, the panel or appliances, turn off power at the main breaker only if you can do it from a dry spot safely. Then have an electrician inspect everything before it is turned back on. Water can leave corrosion and residue that cause problems later.
Not always. Many older homes have wiring that is still in fair shape, while others have ungrounded circuits, brittle insulation or unsafe splices from past repairs. The only way to know is to look. We inspect the system and tell you which circuits need replacing, if any, so you do not pay for more than you need.
Look for fixtures rated for wet locations and made from materials that resist corrosion, such as certain marine-grade finishes, brass or quality composites. Cheap painted steel tends to rust quickly near salt water. Sealed connections and in-use covers on outlets also make a big difference in how long outdoor electrical lasts.
Yes. A panel with heavy rust or corroded breakers should be replaced, not just repainted. We size the new panel for your home, install it to code, pull the permit and schedule the inspection. If more capacity would help, for an EV charger or new AC, we plan for that at the same time.
Southwest Ranches, Davie, Dania Beach, Parkland, Lauderhill, Plantation, and all of Broward County.
