A lot of Margate was built in the 1960s and 1970s, and you can see it in the electrical. Two-prong outlets, kitchens with just one or two circuits, bathrooms without GFCI protection, and panels that have been patched over the years by different people. None of that is unusual. It just means the house deserves a careful look before more load gets added to it.
Chanay Electric is a licensed, bonded and insured electrician from Plantation. In Margate we do a lot of outlet and switch work, safety inspections and repairs for homeowners, condo owners and families helping an older parent stay safe at home.
Here is what some of our customers have shared.
These are the services Margate homeowners and condo owners ask us about.
In older Margate homes and villas, the most common calls are outlets that went dead, lights that flicker, and a breaker that trips when the microwave and toaster run together. Often the cause is a worn device or a loose connection that has been heating up for a while. We find it, fix it, and check the rest of that circuit while we are there.
Some Margate homes still have their original panel, and others have one that was replaced decades ago. Either way, it may not have room for the circuits a modern kitchen or a new AC system needs. We inspect the panel for wear, rust and overheating and tell you plainly whether an upgrade is needed now or can wait.
Small changes make a big difference in an older home. Replacing two-prong outlets with grounded or GFCI outlets, adding a ceiling fan to a bedroom, or putting brighter fixtures in a dark hallway can make a house safer and easier to live in. We handle those jobs neatly and without turning your home upside down.
If your home has seen several owners and several renovations, the wiring behind the walls may be a mix of eras. We look for ungrounded circuits, undersized wire, and splices made outside of junction boxes. Then we rewire the sections that need it, room by room if you prefer, so you can spread the work out.
Older homes often have fewer protections in place, and the electronics inside are newer than the wiring. A whole-house surge protector installed at the panel adds a layer of defense for your AC, refrigerator, TV and medical equipment if anyone at home relies on it. It is a simple install with a lasting benefit.
If you live in Margate and something in the house does not feel right, a flickering light, a warm outlet, or a breaker that will not stay on, give us a call before it gets worse.
We work Monday through Saturday, 8am to 5pm. Call Chanay Electric at (754) 799-4371 or contact us here.
Margate is one of the more established cities in north central Broward, with a large share of homes, villas and condominiums built a generation or two ago. Many of those buildings still have parts of their original electrical systems. That is not automatically a problem, but it means wiring, outlets and panels have been carrying load for a long time, often longer than they were designed for.
The city also has a lot of retirees and 55 and older communities. For those households, electrical safety is about more than code. Good lighting on walkways and in hallways, outlets that are not loose, and switches placed where they are easy to reach all help prevent falls and accidents. A safety inspection is a good starting point, especially after buying a home or when a family member moves in. Lighted switches and night lights on a hallway circuit are small touches that help.
Condo and villa owners should know that some work involves the association. Anything that touches the building’s shared electrical, or the exterior, may need board approval. Work inside your unit usually does not, though larger jobs can still need a permit from the city. We help you sort out which is which before work begins, so there are no surprises.
We take jobs all over Margate, including:
Two-prong outlets have no ground, which means less protection for you and your electronics. The right fix depends on the wiring behind them. Sometimes a ground can be added, and sometimes GFCI protection is the code-approved option. We check what you have and recommend the safest choice that fits your budget.
For work inside your unit, like replacing outlets, fixtures or a ceiling fan, you usually do not. For anything that touches the building's shared electrical, the meter area or the exterior, you probably will. Every association is different, so check your documents or ask the manager. We can explain the scope so you know what to ask.
A short dip when a big motor starts can be normal. If the flicker is strong, lasts, or is getting worse, it can point to a loose connection, a tired breaker, or a shared circuit that is overloaded. Loose connections create heat, so it is worth having us test it rather than living with it.
We look at the panel and breakers, check for overheating or corrosion, test outlets for proper grounding and polarity, check GFCI protection in kitchens, baths and outdoors, and look for signs of amateur work. You get a clear explanation of what is fine, what should be fixed soon, and what can wait.
Yes. Many Margate homeowners start with the most important safety items, such as the panel or the kitchen and bath circuits, and handle other rooms later. We will tell you honestly what needs attention first and what can safely wait, so you can plan the work around your budget.
Southwest Ranches, Oakland Park, Coconut Creek, Parkland, Tamarac, Lighthouse Point, and all of Broward County.
